|
The 2004 SSRC Annual
Stability Conference was held on March 24-27, 2004, in Long
Beach, California. This conference was the hosted by the
AISC's North American Steel Construction Conference. This
602 page book contains papers covering reports of current
research activities germane to the various SSRC task groups
and task reporters.
MEMBERS: $45.00
NON-MEMBERS $50.00
Order
Now!
Contents
IMPROVING
THE SEISMIC STABILITY OF CONCENTRICALLY BRACED STEEL FRAMES
by R. Tremblay, L. Poncet
BUCKLING
BEHAVIOR OF STEEL BRIDGE GIRDERS BRACED WITH PERMANENT METAL
DECK FORMS by O. Ozgur Egilmez, Todd A. Helwig
DEVELOPMENT
OF WEB SLENDERNESS LIMITS TO ASSURE COMPACT STEEL I-GIRDER
PERFORMANCE
Jennifer E. Righman, Karl E. Barth, Donald W. White, Lili
Yang
BEHAVIOR
OF HORIZONTALLY CURVED BATH-TUB GIRDER BRIDGES UNDER CONSTRUCTION
by Muayad Aldoori, Peter C. Birkemoe
IN-PLANE
STABILITY FOR PLASTIC DESIGN OF SINGLE STOREY PORTAL FRAMES
– A REVIEW OF THE PROVISIONS OF THE LATEST BRITISH
STANDARD by C.M. King
SIMPLIFIED
DESIGN OF BUILDING FRAMES USING FIRST-ORDER ANALYSIS AND
K = 1.0 by G.H. Kuchenbecker, D.W. White, A.E.Surovek-Maleck
EFFECTIVE
LENGTH APPROACH AND NOTIONAL LOAD APPROACH FOR
COLD-FORMED STEEL FRAMES DESIGN by Andrew T. Sarawit, Teoman
Pekoz
EFFECTS
OF THE BENDING PROCESS ON THE OUT-OF-PLANE STABILITY OF
STEEL ARCHES by D.B. la Poutre, H.H. Snijder, J.C.D. Hoenderkamp,
M.C.M. Bakker
STABILITY
DEGRADATION AND REDUNDANCY IN DAMAGED STRUCTURES by B.W.
Schafer, P. Bajpai
BUCKLING
OF GUSSET PLATES: A COMPARISON OF DESIGN EQUATIONS
TO TEST DATA by Bo Dowswell, Stacey Barber
.
THE
ANALYSIS OF COMPOSITE STEEL-AND-CONCRETE COMPRESSION MEMBERS
WITH HIGH STRENGTH CONCRETE by Jinrich J. Melcher, Marcela
Karmazinova
TOWARDS
AN EFFICIENT DESIGN AGAINST DISTORTIONAL BUCKLING: FORMULAE
FOR C AND Z-SECTION COLD-FORMED STEEL MEMBERS by Nuno Silvestre,
Dinar Camotim
RECENT
EUROPEAN ADVANCES IN THE MEMBER VERIFICATION TO LATERAL
TORSIONAL BUCKLING by Rene Maquoi
STABILITY
OF UNBRACED STEEL JOISTS SUBJECT TO MID-SPAN LOADING by
Ronald D. Ziemian, Justin E. Schwarz, Matthew R. Emerson,
Drew R. Potts
ON
MOMENT CAPACITY AND FLEXURAL DUCTILITY IN DOUBLY SYMMETRIC
WEB-TAPERED I-GIRDERS by B.S. Miller, C.J. Earls
EFFECTS
OF INELASTIC LOCAL BUCKLING ON THE SEISMIC BEHAVIOR OF
STRUCTURAL MEMBERS AND FRAMES by Zhihui Huang, Amit H. Varma,
Ronald S. Harichandran, Antonio Cordero
GIRDERS
WITH SINUSOIDALLY CORRUGATED WEBS – LOAD CARRYING
CAPACITY AND STABILITY by H. Pasternak
NEW
DESIGN STANDARDS FOR COLD-FORMED STEEL FRAMING by J.W. Larson,
R.A. LaBoube
STABILITY
AND STRENGTH OF COLD-FORMED S-SECTION BEAMS by Eduard L.
Airumyan
EXPERIMENTAL
INVESTIGATION FOR BUCKLING STRENGTH OF
DOUBLE-CHANNEL COLUMNS by Dung-Myau Lue, Tsong Yen, Jui-Ling
Liu,
Yao T. Hsu
STABILITY
AND DUCTILITY OF STEEL FRAMES WITH SEMI-RIGID
CONNECTIONS by Miklos Ivanyi
STABILITY
OF STIFFENED STEEL PLATES UNDER COMBINED BENDING AND
IN-PLANE AXIAL LOADING by G.Y Grondin, Qishi Chen, Bryan
Hanson
FLEXURAL
STRENGTH OF ALUMINUM EXTRUSIONS OF ARBITRARY
CROSS-SECTION by Yongwook Kim, Teoman Pekoz
LOCAL-PLATE
AND DISTORTIONAL POST-BUCKLING BEHAVIOR OF
COLD-FORMED STEEL COLUMNS: ELASTIC AND ELASTIC-PLASTIC FEM
ANALYSIS by Pedro Borges Dinis, Dinar Camotim
EVALUATION
AND MITIGATION OF P-? EFFECTS ON 2D MDOF FRAME BEHAVIOR
by Hiroyuki Tagawa, Gregory MacRae, Laura Lowes
STABILITY
ANALYSIS OF STEEL FRAMES WITH SEMI-RIGID CONNECTIONS by
Ali Abolmaali, Hadi Razavi, Zachary Godsell
ULTIMATE
STRENGTH OF PLATE GIRDER PANELS WITH INITIAL IMPERFECTION
by Kevin, Y.H., Tsai
BEHAVIOR
OF CFT COLUMNS AND BEAM-COLUMNS UNDER FIRE LOADING by Amit
H. Varma, Jarupat Srisa-Ard, Sangdo Hong
PROPOSED
P DELTA DESIGN FOR THE AUSTRALIAN AND NEW ZEALAND
LOADING STANDARDS by B.J. Davidson, R.C. Fenwick
|
